A lot of people don't understand carbon molecular sieves, they don't know what this is. We should master some professional knowledge in this field, such as carbon molecular sieve of nitrogen generator. Carbon molecular sieve is the target of dissolving CO2 N2 according to the characteristics of controlled screening. When the carbon molecular sieve adsorbs the residue vapor, the pore the vertical pore are only the safety channels of the safety channel, the adsorbed molecular structure is transported to the micropore plate the sub micropore plate, which are the specific digestion absorption adsorption volume. There are many microporous plates in the outside of carbon molecular sieve, which can disperse the molecular structure with smaller kinetic energy size into the pores quickly, limit the entry of large-diameter molecular structure. Due to the difference of relative dispersion rate of molecular structure of different sizes of vapor, the composition of vapor parameters can be well dissolved. Therefore, in the production of carbon molecular sieve, according to the molecular size, the micropores on both sides of the carbon molecular sieve should be diffused in the middle of 0.28-0.38 nm. In this type of microplates, CO2 can be rapidly dispersed into the pores according to the micropores, but nitrogen can be dissolved by oxygen nitrogen. The diameter of the microplate is the basis for screening CO2 N2 based on carbon. If the diameter is very large, the oxygen nitrogen carbon molecular sieves are very easy to enter into the microporous plate, which can achieve the actual effect of dissolution. When the diameter is too small, neither oxygen nor nitrogen can enter the microporous plate, nor can it be dissolved.
1. Pressure regulating valve on pipeline
As a result, the interest in the maintenance of the nitrogen generating device is improved, the characteristics of the machinery equipment are reduced. Therefore, the application of imported valves solves the thin stage of carbon molecular sieve nitrogen generator the source. For the traditional PSA nitrogen generator, it is very important to deal with the sensitivity, service life maintenance problems of its constituent valve. The maintenance rate of some home installed gate valves is higher.
2. The key of PSA nitrogen plant
Carbon molecular sieve is selected to ensure the application of carbon molecular sieve, carbon molecular sieve canning technology carbon molecular sieve automatic canning equipment. Compared with other similar nitrogen generators, the utilization rate of nitrogen is improved, the energy consumption of nitrogen generator is reduced by 1525%, thus ensuring the service life of carbon molecular sieve reducing the "load" of carbon molecular sieve absorbing tables, chairs benches. It improves the adsorption capacity of carbon molecular sieve nitrogen generator.
Characteristics of activated carbon organic waste gas adsorption equipment
1. It can remove volatile organic compounds odor, the vapor absorption meets the requirements.
2. The actual effect of low concentration of volatile organic compounds is good. Activated carbon is repeatedly used to reduce the cost
3. Solve the problem of large exhaust air volume high actual absorption effect.
4. Easy to remove replace activated carbon.